D-Link DCS-4701E User Manual page 27

Section 3: Configuration
Use this section to configure your camera's IPv6 settings. After making any changes, click the Save button to save your changes.
Enable the IPv6 setting to use the IPv6 protocol.
Enable IPv6:
Enabling the option allows you to manually set up the address, specify an
Manually
optional IP address, specify an optional router address, and an optional
Setup The IP
primary DNS address. You can click the Information button to see the IPv6
Address:
address lists for the host, gateway, and DNS server.
Use this section to configure your camera's PPPoE settings. After making any changes, click the Save button to save your changes.
Enable this setting if your network uses PPPoE.
Enable PPPoE:
Enter the username and password for your PPPoE account. Re-enter your
User Name /
password in the Confirm Password field. You may obtain this information
Password:
from your ISP.
This shows your current PPPoE connection status.
PPPoE Status:
D-Link DCS-4701E User Manual
IPv6
PPPoE
27