Honeywell MagicStat 28 Programming And Installation Instructions page 28

COOLING
To avoid possible compressor
damage, do not operate the cooling
system when outside temperature is
below 50° F [10° C]. See compres-
sor manu-facturer instructions for
further information.
NOTE: When cooling setting is
changed, thermostat may delay
up to five minutes before turning
on the air conditioner. This delay
protects the compressor.
Cool Off Heat
Auto On
Temp
Temp
Cool Off Heat
Auto On
26
Move the system switch to COOL
and the fan switch to AUTO.
Press key until setting is about 10° F
[6° C] below room temperature. The
cooling equipment and fan should
start.
Press key until the setting is about
10° F [6° C] above room tempera-
ture. The cooling equipment and
fan should stop.
Move the system switch to OFF
with the fan switch still at AUTO.
The system and fan should be off.