Table of Contents
Advertisement
Available languages
Available languages
Remove mounting plate from wall, and drill
3/16 inch holes in wall (if drywall) as marked.
For firmer material such as plaster or wood,
drill 7/32 inch holes. Gently tap anchors
(provided) into drilled holes until flush with the
wall.
Reposition mounting plate over holes,
pulling wires through wiring opening. Loosely
insert two mounting screws into holes.
Level for appearance only; thermostat will
function properly even when not level. Tighten
mounting screws.
19
LEVEL
M1714A
INSTALLATION
Hide quick links:
Advertisement
Chapters
Table of Contents
