Honeywell MagicStat 28 Programming And Installation Instructions page 14

This guide can be used for programming your new thermostat.
NOTE: Batteries are required for operation and programming. When inserting batteries, set
system switch to OFF. Remove battery door (on thermostat left side) using a coin at the
bottom. Follow instructions on pages 6 and 7.
Set Current Time/Day
To set time, press and release
press and release
Heating Program
With system switch at HEAT, press and release
appear on display.
once, press
Clock/Day
again, press
Clock/Day
Time
until current time shows; to set day,
Time
until current day shows; then press
once. "WAKE," Mon-Fri and "SET"
Schedule
12
Run
.
Program