Mazda MX-30 2022 Owner's Manual Leaflet page 450

If Trouble Arises
Flat Tire
6. Pull out the air compressor hose
and the air compressor plug from
the air compressor.
1. Compressor hose
7. Install the air compressor hose
which was pulled out of the air
compressor to the injection valve of
the bottle.
1. Compressor hose
2. Valve
3. Injection hose
CAUTION
Make sure that the air compressor
switch is off before inserting the air
compressor hose to the injection
valve of the bottle. If the air
compressor hose is not installed to
the injection valve of the bottle
securely, the sealant may leak.
8. Remove the valve cap from the
valve of the flat tire, install the
7-6
injection hose to the tire valve, turn
the sleeve to the right, and tighten
it.
1. Valve
2. Valve cap
3. Injection hose
9. Install the bottle to the air
compressor and press it in until the
left and right tabs are engaged
securely.
1. Tabs
10.Insert the air compressor plug into
the accessory socket inside the
vehicle and switch the power
switch to ACC.