Mazda MX-30 2022 Owner's Manual Leaflet page 155

Spare keys or keys for other vehicles
equipped with an immobilizer
system touch or come near the key.
Devices for electronic purchases, or
security passage touch or come near
the key.
If the EV system cannot be started
because of a dead key battery, the EV
system can be started using the
following procedure:
1. Continue to depress the brake
pedal firmly.
2. Make sure that the KEY indicator
light in the instrument cluster and
power switch indicator light (green)
flashes.
3. Align the center area of the
emblem on the transmitter with the
center area of the power switch
while the power switch indicator
light (green) flashes.
1. Indicator light
2. Power switch
3. Transmitter
4. Emblem
4. After the power switch indicator
light (green) changes to full
illumination, press the power
switch.
Starting and Stopping the EV System
NOTE
5. Make sure that the READY
indication is displayed in the
instrument cluster.
The EV system cannot start unless

the brake pedal is completely
depressed.
If there is a problem with starting

the EV system, the power switch
indicator light (amber) flashes. In
this case, the EV system could be
started, however, have the vehicle
inspected by an Authorized
Mazda Dealer as soon as
possible.
If the power switch indicator light

(green) does not turn on, perform
the operation from the beginning.
If it still does not turn on, have
the vehicle inspected by an
Authorized Mazda Dealer.
To change the power switch

position, release the brake pedal
after the power switch indicator
light (green) turns on, then press
the power switch.
The power switch is switched in

the order of OFF, ACC, and ON
each time it is pressed. Once the
power switch is switched OFF,
the power switch position can no
longer be changed. Therefore, to
start the EV system, perform the
operation from the beginning.
When Driving
4-7