Maintaining The Brushes And Wheels - Bissell SPINWAVE 2931F Manual

Maintaining the Brushes and Wheels

Check out the BISSELL Connect App for tips and videos on maintenance.
1.
Turn the Power Switch
OFF. Pinch the tabs on the
brush guard inward and pull
to remove. Lift to remove the
Brush Roll.
4.
Use a damp cloth to wipe
away debris around the Brush
Roll.
7.
To reinstall the caster wheel,
push down firmly until you
hear a "click".
WARNING
troubleshooting checks.
10 BISSELL.com
2.
Clean the Brush Roll with
the Cleaning Tool.
5.
Turn the Power Switch
OFF. Set your robot on a soft
surface and pull up firmly on
the caster wheel.
8.
Use a Phillips-head
screwdriver to remove the
screw. Pull up on the base
of the brush. Once removed,
they can be rinsed or soaked
in water. Be sure they are
completely dry before
returning to the machine.
To reduce the risk of electric shock, turn the Power Switch OFF before performing maintenance or
3.
Replace the Brush Roll and
brush guard. Note: The Brush
Roll has two different end
pieces. Ensure the square-
shaped end piece is inserted
into the square-shaped port.
6.
Clean out any visible hair
and debris with a dry cloth.
9.
Push the brush directly
onto the holder. Replace the
screws with a Phillips-head
screwdriver.