Bissell SPINWAVE 2931F Manual page 9

Dry Vacuum Mode
(continued)
Spot Mode
1.
Place the robot in the center
of the area you want to clean.
Maintaining the Dirt Bin
1.
Turn the Power Switch OFF.
Press the button on top of the
Dirt Bin and pull to remove.
4.
Use the Cleaning Tool to
brush the filter cover and
filters. Do not wash the filters.
x3
2.
To start cleaning, press the
Start/Pause button 3 times
or select "Spot" mode in the
BISSELL Connect App.
2.
Open filter door by pulling
both sides apart. Empty the
debris from the Dirt Bin.
5.
With filters removed, rinse
the Dirt Bin with tap water.
Ensure Dirt Bin is completely
dry before reinstalling. Do not
machine wash the Dirt Bin.
40 inches 40 inches
(1m) (1m)
3.
The robot will clean in a
spiral pattern, covering an area
approximately 40" x 40" (1m
x 1m) for about 5 minutes. The
robot will beep to let you know
it's finished.
3.
Remove the filter cover,
then the foam and pleated
filters.
6.
Once clean, reinstall the
filters and filter cover, close
and push back into the
machine.
BISSELL.com 9
40 inches 40 inches
(1m) (1m)