What's In The Box; Docking And Charging Your Robot - Bissell SPINWAVE 2931F Manual

What's in the Box?

Standard accessories may vary by model.
BISSELL®
SpinWave® Robot
with Dirt Bin
Cleaning Tool

Docking and Charging Your Robot

Go to support.BISSELL.com for assembly videos.
Note: The Docking Station & Docking Tray must be installed on a hard surface. The robot's soft
surface sensors prevent it from cleaning carpets and area rugs in Mop Mode.
Be sure the device is near your WiFi router and the robot is fully charged or in the dock during the
pairing process.
W i- F i
40 inches 40 inches
(1m) (1m)
80 inches 40 inches
(2m) (1m)
1.
Place the back of Docking
Tray firmly against a wall.
Ensure there are at least 40
inches to one side, 40 inches
to the opposing side and no
obstructions in the front. Tip
the Docking Station into the
Docking Tray.
Status Button Light State
Power ON Pulse Once > Blink > On
Cleaning Blink > Fade In > On
Charging Breathing
Pairing Mode Blink
Paired On
Docking Slow pulsing, white
4 BISSELL.com
Wate r
Mop Tank with
Mop Pads
Trial-Size Formula
40 inches 40 inches
(1m) (1m)
2.
Insert the Docking Station
Power Adapter plug into the
port on the side of the Docking
Station. Plug the other end into
the wall outlet.
Docking Station
Replacement Edge
Cleaning Brushes
(select models)
Light Ring
Pulse Once
Pulse Once > Fade In > 30 seconds > Fade Out Activation Sound
Pulse Once > Breathing for 30 seconds > Off
Off
Solid for 5 Seconds > Fade Out
Off
Docking Tray
(2) Extra Mop
Pads
3.
Turn the robot ON and put
it on the Docking Station. The
first charge will take 4-5 hours.
Sound
Activation Sound
1 Beep
1 Beep
3 beeps
None
Power Adapter
Extra Filter
e r a t W