Maintaining The Brush Roll - Bissell ICONpet EDGE CORDLESS VACUUM 2894 Series Quick Start Manual

Maintaining the Brush Roll

Go to support.BISSELL.com for tips on maintaining and replacing your Brush Roll.
1.
Turn the machine OFF and
press the Foot Release Button
to disconnect the Motorized
Floor Cleaning Foot from the
Extension Wand.
4.
To reinsert, push the Brush
Roll straight down into the
chamber with the flat side of
the Brush Roll against the flat
side of the chamber wall.
10 BISSELL.com
2.
Remove the sole plate from
the bottom of the foot by
unscrewing the seven screws
with a Phillips-head screw
driver.
5.
Reattach the sole plate
to the bottom of the foot by
reinserting all seven screws
and securing with a Phillips-
head screwdriver.
3.
Pull the Brush Roll straight
up and out of the chamber to
remove.