Table of Contents
Advertisement
14-Slot AdvancedTCA Shelf
11596-100/-101/-102/-103
Figure 16:
7
Fixing Screws
10
Guides
Install PEM:
1 Insert the PEM into the Shelf. The slots (11) must slide into the guides (10).
Note: The blue Hot Swap LED (2) starts blinking until the PEM is fully
functional. Now only the red Alarm LED (3) is illuminated until power is
provided to the PEM.
2 Tighten both fixing screws (7).
Torque: 0.67 Nm (6 in.-lb.)
3 Connect the power cables at the power terminal.
Torque: Bolts 8-32 UNC 1.4 Nm (12.5 in.-lb.)
Note: Verify the correct polarity of the -48 VDC and the RTN cables!
4 Mount the terminal cover (5).
5 Power-on the power supply for the PEM.
Note: When all Power Feeds are present, only the green OK LED (4) is
illuminated.
www.a-tca.com / www.schroff.biz
11
Slots
27
Maintenace
12706849
R1.1, July 23, 2008
Advertisement
Table of Contents
