Raider RD-HM11 User Manual page 9

General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following
instructions can cause electric shock, fire and / or severe injuries.
Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit. Disarray and
poor lighting may contribute to the occurrence of an accident.
1.2. Do not operate in an environment where the mixer with
an increased risk of an explosion in the vicinity of flammable
liquids, gases or powders.
During operation of the mixer can be separated sparks that
can ignite powders or fumes.
1.3. Keep children and bystanders at a safe distance while
working with the mixer.
If your attention is diverted, you may lose control over the
mixer.
2. Safety when working with electricity.
2.1. Plug of the mixer must be suitable for contact. In no case
is allowed to modify the structure of the plug. When working with
electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric
shock.
2.2. Avoid touching your body to earthed bodies, eg. pipes,
heaters, stoves and refrigerators. When your body is grounded,
risk of electric shock is greater.
Protect your mixer from rain and moisture.
Penetration of water into the mixer increases the risk of
electric shock.
2.3. Do not use a power cord for the purposes for which it is
not provided, eg. to bear the mixer for cable or removing the plug
from the outlet. Protect cords from heat, oil, contact with sharp
edges or points of mobile machines.
Damaged or twisted cables increase the risk of electric
shock.
2.4. When working with drill impact out, switch the machine
only in installations equipped with electric switch Fi (safety shut-
off switch with Residual protection), and current leakage, which
is triggered when DTZ must be no more than 30 mA, according
to "Regulation 3 device for the electrical equipment and power
lines. Use only extension, suitable for outdoor use. Using the
extension, designed for outdoor use reduces the risk of electric
shock.
2.5. If you require the use of the mixer and in moist
environment, plug the machine only in installations equipped with
electric switch Fi. Use of such a safety switch utechni currents
reduces the risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions carefully and act
cautiously and prudently. Do not use the mixer, when you are
tired or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work mixer may have the effect of
extremely serious injuries.
3.2. Work with protective work clothing and always with
safety glasses.
Wearing suitable for drilling and the activities of personal
protective equipment, such as respiratory masks, healthy,
tightly closed shoes grapple with a stable, protective helmet and
silencers (hearing protectors), reduces the risk of accident.
3.3. Avoid the danger of incorporating the mixer inadvertently.
Before you turn the plug into the power supply network, make
sure the trigger switch is in position "off". If, when you carry the
mixer, keep your finger on the trigger switch, or if you submit
a voltage of the mixer, where it is included, there is the risk of
accident.
3.4. Before you turn on the mixer, make sure that you have
removed all of her utilities and wrenches.
Utilities, forgotten rotating unit can cause injuries.
3.5. Avoid unnatural positions of the body. Work in a stable
position of the body at any time and keep the balance. So you
can control the mixer better and safer if unexpected situations
arise.
3.6. Work with appropriate clothing. Do not operate with
loose clothing or ornaments. Keep your hair, clothes and gloves
at a safe distance from rotating units of the mixer. Robes, attire,
long hair can be caught and carried away by chuck.
3.7. If possible use an external aspiration system, make sure
it is switched on and functioning properly. Use of the aspiration
system reduces the risks due to the discharge dust at work.
4. Care to drill to hit.
4.1. Do not overload the mixer. Use only the mixer in
accordance with its intended purpose. Will operate better and
safer when using the appropriate mixer manufacturer in the
specified range of load.
4.2. Do not use mixer, whose starting switch is damaged.
Mixer, which can not be excluded and included as provided
by the manufacturer, is dangerous and must be repaired.
4.3. Before you modify the settings of the mixer, working to
replace instruments and ancillary devices, and for a long time
when you will not use the mixer, unplug the plug from the supply
network. This measure eliminates the danger of triggering of the
mixer inadvertently.
4.4. Keep mixer in places where they could not be reached
by children. Do not let it be used by persons who are not familiar
with how to work with it and have not read those instructions.
When in the hands of inexperienced users, the mixer can be
extremely dangerous.
4.5. Keep your mixer carefully. Check whether the mobile
units operate impeccable, whether it spells, if there is broken or
damaged items which distort or alter the functions of the mixer.
Before using the mixer, make sure that the damaged parts to
be repaired. Many accidents are caused by poorly maintained
power tools and appliances.
4.6. Use the mixer, attachment, working tools, etc., according
to the manufacturer's instructions. In doing so must comply with
specific operating conditions and operations to perform. Using a
drill impact than those provided by the manufacturer applications
9