Handling And Operation; Cleaning Hard Floors - Silvercrest SHBR 560 A1 Operating Instructions Manual

Handling and operation

ATTENTION! PROPERTY DAMAGE!
► While working with the appliance, make sure that the rotary brush
not get blocked by loose objects lying around on the floor or by carpet
edges. These can damage the rotary brush
properly.
Cleaning hard floors
Once the appliance is assembled and the fresh water tank
and cleaning solution:
Unwind the power cable
z/p
. To unwind the power cable
pull the upper cable retainer
fig. 12).
Insert the plug into the mains power socket.
Press the hard floor switch
The LED on the hard floor switch
Fig. 12
Before each use, press and hold the cleaning solution switch
10 seconds to add cleaning solution to the rotary brush
for use (see fig. 14). The cleaning solution display
blue when the cleaning solution switch
SHBR 560 A1
u
completely from the upper and lower cable retainers
u
quickly from the cable retainers
z
out a little way and turn it downwards (see
r
to switch the appliance on (see fig. 13).
r
lights up blue.
Fig. 13
t
is held down (see fig. 15).
6
and stop it from working
q
is filled with water
t
for about
6
so that it is ready
w
flashes alternately
GB │ MT
6
does
z/p
,
│
89 ■