Balluff Network Interface Notes to the User 1.1. Scope of this This manual describes the construction, function and installation of the Balluff Uni-Standard manual inductive coupler. It applies to the following models: Base BIC 1I3-P2A50-M30MI3-SM4ACA and Remote BIC 2I3-P2A50-M30MI3-SM4ACA (see type designation code) The manual is intended for qualified technicians.
2004/108/EC (EMC) and the EMC law. In our EMC laboratory, which is accredited by DATech for testing electromagnetic compatibility, evidence has been provided that the Balluff products satisfy the EMC requirements of the generic standards: EN 61000-6-4 (Interference emission) and EN 61000-6-2 (Immunity to interference) www.balluff.com...
Balluff Inductive Coupler Base BIC 1I3-P2A50-M30MI3-SM4ACA und Remote BIC 2I3-P2A50-M30MI3-SM4ACA Remote BIC 2I3-P2A50-M30MI3-BPX0C-002-M4CA Construction and Function 3.1. Construction The system is designed for applications with up to 8 sensors. It consists of the following two components: • Base (transmitter) •...
Yellow – static Connection between base and remote OK, data transmission secured Remote indicators Status indicator – "Power on" Indicators Function Green – static Supply voltage OK Green – flashing No connection between base and remote, no data transmission www.balluff.com...
Balluff Inductive Coupler Base BIC 1I3-P2A50-M30MI3-SM4ACA und Remote BIC 2I3-P2A50-M30MI3-SM4ACA Remote BIC 2I3-P2A50-M30MI3-BPX0C-002-M4CA Installation and Connection 5.1. Mutual Attention! Interference Improper mounting may affect the function of the system and lead to damage. The spacings specified for installation must be adhered to.
Output voltage Ground Signal 1 Signal 1 Signal 2 Signal 2 Signal 3 Signal 3 Signal 4 Signal 4 Signal 5 Signal 5 Signal 6 Signal 6 Signal 7 Signal 7 Signal 8 Signal 8 InZone InZone Not used www.balluff.com...
Balluff Inductive Coupler Base BIC 1I3-P2A50-M30MI3-SM4ACA und Remote BIC 2I3-P2A50-M30MI3-SM4ACA Remote BIC 2I3-P2A50-M30MI3-BPX0C-002-M4CA Installation and Connection 6.1. Dimensions – Base 6.2. Mechanical Data – Housing material Brass Base Degree of protection per IEC 60529 IP 67 (only in plugged-in and screwed-down state)
0 °C…55 °C Ambient temperature T -25 °C…75 °C Storage temperature 7.4. Electrical Data – Operating voltage 24 V DC +-5 % Remote Output current 500 mA Short-circuit protected Output peak current Max. 800 mA Operational readiness < 100 ms www.balluff.com...