Kogan KA6VDRYERA User Manual page 4

•
Wait at least 2 minutes after turning off the power supply before turning it on again.
•
Ensure all packaging is removed from the dryer before first use.
•
Follow instructions for use provided with any fabric softener.
•
Do not dry items such as foam rubber (latex foam), shower caps, waterproof
textiles, rubber backed clothes or pillows fitted with foam rubber pads.
•
Do not use if industrial chemicals have been used for cleaning.
•
Do not allow lint to build up around the tumble dryer.
•
The power cord should only be replaced by a service agent authorised by
Kogan.com in order to avoid a hazard.
•
Should the appliance need to be moved, it must be transported vertically.
Electrical safety and cord handling
Always follow basic safety precautions and accident prevention measures when using an
electrical appliance, including the following:
•
Voltage: Ensure your outlet voltage and circuit frequency correspond to the voltage
indicated on the appliance's rating label and your outlet socket is properly earthed.
If this is not the case, do not use the dryer.
•
Separate circuit: We strongly recommend you connect the appliance to a
separate circuit serving only this appliance. This provides the best performance and
prevents overloading the house wiring circuits that could cause a fire hazard from
overheating.
•
Electrical hazard: Do not insert any objects into the appliance.
•
No extension cord: Do not use this appliance with a power adaptor or extension
cord.
WARNING:
positioned so that it is not subject to splashing or liquid ingress.
•
Protect the power cord. Do not kink or damage the power cord. Position the cord
out of the way so no one steps on or places anything on the cord or against it. Do
not run the cord under floor coverings. Position the cord away from high traffic
areas where it will not become a tripping hazard.
•
Disconnect: Unplug the clothes dryer from the power supply after use, before
cleaning, servicing or moving the appliance. To disconnect, turn the appliance off,
switch off the power outlet and remove the plug from the power outlet. Grip the
plug when disconnecting; do not pull on the cord. After disconnection, wait at least
2 minutes before turning the appliance back on again.
•
RCD: Unless your home is already fitted with a residual current device (safety
switch), we recommend installing an RCD with a rated residual operating current
not exceeding 30mA to provide additional safety protection when using electrical
appliances. Consultant an electrician for professional advice.
If such a device must be used, the cord or outlet must be