Faucet Installation - Kohler K-10430 Installation Manual

Spray Hose
Outlet
Escutcheon
Gasket

2. Faucet Installation

Slide the escutcheon and gasket to the spout.
Partially thread two screws into the threaded ring until they
protrude slightly from the backside of the threaded ring.
Run the handspray hose down through the handspray holder.
Slide the threaded ring and washer on the handspray hose.
Run the handspray hose up through the spout mounting hole and
attach it to the inlet hose on the spout.
Position the spout in the desired mounting position.
Slide the metal washer and ring to the threaded shank until the
ring is about 1/4" (6 mm) away from the sink bottom.
Turn the ring until the screws are situated to the front and back
of the faucet. Securely tighten the screws.
1036178-2-D
Spout
Handspray
Sink
Washer
Ring
Screws
4 Kohler Co.