Seav WiWeather S/F 433 Manual page 8

- For connections (power supply), use
flexible cables under insulating sheath in
harmonised polychloroprene (H05RN-F)
with minimum section of the conductors
equal to 0,75 mm
- The connection cables must be fixed by
assembling cable clamps supplied with
the product.
- The device, at the time of installing,
must be carefully managed, ensur-
ing to have assembled the composing
parts correctly. Pay particular atten-
tion to the ceramic plate and to the
connecting flat. When re-closing the
box, the latter must fold, on itself, in
an orderly manner.
- It is very important to establish the
exact location so that the product is
exposed to the same atmospheric
agents as when it is controlled.
.
2
- Do not paint or varnish the sensitive
surface of the control unit.
- The dirt which builds up on the rain sen-
sor surface limits the sensitivity: it is
therefore recommended to clean it once
or twice a year with a damp cloth, after
having disconnected the automation.
- For a correct functioning, it is recom-
mended to always use only one device
for one or more control units installed in
an action range of 20 meters.
- Always carry out the tests of the sen-
sors to ensure the correct functioning of
the installed system.
WiWeather S/F 433
are in compliance with the specifics of
RED 2014/53/EU, EMC 2014/30/EU, LVD 2014/35/EU
Directives.
8