Raider RD-HPC01 User Manual page 18

18 www.raider.bg
See Figure (F).
Filter (6a) should always be installed to protect the valves and other components of high
pressure cleaner of sand, limestone deposits and other particulate matter that can damage
it. So check the filter for contamination and clean it if necessary.
Note: If not installed filter (6a) the security lapse? The temperature of the water supply
should not exceed 40 ° C. Water power must have the following parameters: working
pressure of 3 bar and a minimum internal diameter of 13 mm (1 / 2''). Suitable garden hose
with a diameter of 1 / 2 "long and 5 to maximum 25 m (not included in the complete set).
Water must be clean and free of sand and corrosive substances. Work in a dry (no water) can
cause damage to high pressure cleaner. Before placing the trigger of the pistol grip must be
pressed to remove air from the pump and pressure tank.
3.11. Connect high pressure hose (4) to nozzle (2). See figure (A) and figure (G).
3.12. Install the extension (8), insert it into the spray gun (10) and Screw it. See Figure (H).