Raider RD-HPC01 User Manual page 15

General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause
electric shock, fire and / or severe injuries. Keep these instructions in a safe place.
1. Safety.
1.1. It is mandatory inclusion of high pressure cleaner only electric plants equipped with
electric switch Fi (safety shut-off switch with Residual protection), and current leakage,
which is triggered when RCD (Residual Current Device), RCD must be no more than 30 mA.
Information on the voltage of the electricity network and the type of plate must comply
with the data on your grid.
1.2. Use only extension cord 3 Ч 1,5 mm2 the maximum length of 20 m and plug capable
compound with an increased degree of moisture resistance and protection from water
splashes. In use, extension of the cable and plug contacts must be fitted with a grounding
conductor. Cables and extension leads must not be coiled or twisted. It is necessary to
protect high pressure cleaner direct influence of rain. All electrical connections must be
protected from moisture. Contacts and plugs should be dry and not lying on the ground. Be
assured that under no circumstances will the water and moisture to reach or contact high
pressure cleaner.
1.3. Never touch the plug with wet hands.
1.4. High pressure cleaner stream of water should not be aimed at people, electrical
appliances, animals or high pressure cleaner itself.
1.5. Not permitted directing flow against themselves or other people to clean clothing or
shoes.
1.6. Not permitted the use of high pressure cleaner by children. Take the necessary steps
to prevent children's access to high pressure cleaner or power cord.
1.7. High pressure cleaner should not be included without water!
1.8. Keep space around high pressure cleaner clean and well lit. Disarray and poor
lighting may contribute to the occurrence of accidents.
1.9. High pressure cleaner should be stored at temperatures above 0 ° C.
1.10. Protect the power cord from heat, oil, contact with sharp edges or points of mobile
machines. Damaged or twisted cables increase the risk of electric shock.
1.11. Should be excluded from high pressure cleaner power before carrying out
maintenance work in. Do not let high pressure cleaner be pulled and held for the power
cord.
1.12. In order to ensure safety should only use genuine parts or parts recommended by
the manufacturer. Not permitted the use of high pressure cleaner provided that the power
cord or other element of high pressure cleaner damaged. Damaged power cables increase
the risk of electric shock.
1.13. High pressure cleaner designed so that all moving parts and hull ensure safe
conditions for use. For damage caused by attempts to change the structure of high pressure
cleaner manufacturer is not liable.
1.14. Not permitted the use of high pressure cleaner working with other liquids except
plain water.
1.15. Do not bend hose, high pressure and not go through it with the car.
1.16. Not be allowed to suction fluids containing solvents, acids, acetone, including
gasoline, paint thinners and naphtha, as they are flammable, explosive and poisonous.
When using high pressure cleaner in high-risk areas (eg fuel tanks) should be respected
force in the case of safety regulations. Not be allowed in work areas with an increased risk
of explosions.
1.17. Not allowed spraying of materials containing asbestos and other substances harmful
to health.
1.18. Use only tested cleaning. Improper cleaning may damage the machine and cleaning
items.
1.19. Do not use undiluted detergents. Products are safe so far do not contain acids, bases
RAIDER POWER TOOLS 15