Raider RD-HPC01 User Manual page 16

16 www.raider.bg
or environmentally hazardous substances. We recommend that you store cleaning products
out of reach of children. In preparation of falling into them immediately flush eyes with
plenty of water, if swallowed by a specialized preparation immediately seek medical help.
1.20. When cleaning vehicles and observe the local regulations do not allow product of
machine oil in groundwater.
1.21. High pressure cleaner must be connected to a water distribution network with a
maximum pressure of 0.7MPa. If the pressure in your water system is higher, the compulsory
fitting reducer valve to reduce pressure to recommended.
1.22. For greater security guard has shot against accidental inclusion. When he was
activated spreypistoletat can not spray water.
1.23. High pressure cleaner have automatic protection against overload. This is a thermal
sensor that protects the motor from overheating congestion. If overloaded, the machine will
stop and have to wait a few minutes until cool.
1.24. In no case should be approaching the nozzle of less than 30 cm from the surface
cleaning ¬ ness (if you suspect that water pressure could cause damage, should first try
directing it to the stream surface of a small hidden place) .
1.25. Not permitted the use of high pressure cleaner washing of surfaces, which can be
easily removed top layer. Necessarily have to be moved by water jet cleaning surface. It
should not be allowed to stream ¬ s continued to be directed at the same place, because it
can cause damage to the surface.
1.26. Necessarily before attempting to pressure washer should consult with the supplier
of the product intended for washing, that its surface is adapted for high pressure washer.
1.27. Failure to comply with the instructions may lead to electric shock, fire and / or
severe injuries.
2. Functional description and purpose. You purchased high pressure device for home use
and is intended for washing the surfaces under high water pressure. ¬ head is intended for
washing cars, motorcycles, boats, caravans, trailers, patio, windows, masonry barbecues,
garden furniture and lawn mowers.
Not permitted the use of high pressure cleaner for activities other than its intended
purpose.
3. Assembly of the elements of high pressure cleaner and commissioning.
3.1. High pressure cleaner Place on a flat, dry, stable and horizontal space.
3.2. Make sure it is protected from rain and direct water spray.
3.3. All joints and connections on suction and Injection piping must be firm, precise and
tight checked for leaks.
3.4. Failure due to work high pressure cleaner dry, the security lapse.
3.5. Emerging from the nozzle, high pressure stream of water produces reactive power, so
keep the spray gun and the tube always firmly with both hands.
3.6. Installation of the holder of the spray gun (9);
Press the holder (9) to the body of high pressure cleaner in a specified location on the
lower figure B and slide down.