To Set Up - Coleman 9941-768 Instructions For Use Manual

To Set Up

Step 1
■ Remove grill, stand and
regulator from packaging.
■ Regulator is packed in
the end of the Styrofoam.
■ Inspect all packing and
remove all parts.
■ Your unit includes:
(1) Stand
(2) Side tables
(1) Stove
(1) Lid
(1) Waterpan
(1) Regulator
(1) Grill
(1) Griddle
■ See replacement parts
list for identification.
Step 2
Helpful hint: Use a ground cloth to pro-
tect the finish.
■ Turn the stand upside down.
Step 3
■ Push outer leg sleeve toward cen-
ter of stand to prevent binding at
pivot point.
■ While unfolding legs, if you feel
resistance, set legs back in folded
position and slide outer leg sleeve
toward center, then unfold legs.
Step 4
■ Extend legs fully.
Extend
Legs
Step 5
■ Engage locking buttons.
Locking
Button
4
Step 6
■ Make sure legs are fully seat-
ed in metal support bracket. You
can visually check that the side
table pin holes are aligned
(where legs meet stand base).
Holes must be
in alignment
Step 7
■ Swing wire braces into position and
insert ends of wire braces into holes
in the legs.
Outer
Step 8
Sleeve
Leg
■ Remove side tables
from locked storage
position.
■ Insert side tables in
position with a firm push.
The side tables will snap
in place.
Step 9
■ Place the
stand outdoors
and set on sturdy,
flat surface.
■ Adjust foot pad
levels if grilling on
uneven surface.
■ Place the stove
onto the stand.
The base of the
stove is designed
to snuggly fit the
stand.
■ Align front of
stove with stand
handle.
Notes
Wire
Brace
Foot
Pad
13