Battery Installation Or Replacement - C-LOGIC 95 Instruction Manual

Non-contact digital tachometer

Hide thumbs Also See for 95:

Table of Contents

Available languages

C-LOGIC 95 • Non-contact digital tachometer

Press plus or minus key to select storage number. At this time, if you press

the backlight key, the rotation speed value will flash. Thus, you can read and

display the value in the current storage number. It can exit the storage state by

pressing the MEM key in the storage state.

BATTERY INSTALLATION OR REPLACEMENT

The power supply used by this meter is four 1.5V SIZE AAA batteries. To re-

place batteries, open battery cover, remove the old batteries, install new bat-

teries of the correct size, according to the illustration on the cover. Close the

battery cover after installation, and tighten screw before using the Meter.

Table of Contents

Do you have a question about the 95 and is the answer not in the manual?

98 9600 9500