Download
Share
Print this page
C-LOGIC 8730 Instruction Manual
  1. Manuals
  2. Brands
  3. C-LOGIC Manuals
  4. Measuring Instruments
  5. 8730
  6. Instruction manual

C-LOGIC 8730 Instruction Manual

Leakage clamp meter
Hide thumbs Also See for 8730:

Advertisement

Quick Links

Download this manual
C-LOGIC 8730
INSTRUCTION MANUAL
Leakage Clamp Meter
21

Advertisement

loading
Need help?

Need help?

Do you have a question about the 8730 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for C-LOGIC 8730

Summary of Contents for C-LOGIC 8730

  • Page 1 C-LOGIC 8730 INSTRUCTION MANUAL Leakage Clamp Meter...
  • Page 2 Leakage Clamp Meter Leakage Clamp Meter Earth Resistance Clamp Meter Earth Resistance Clamp Meter CONTENTS CONTENTS WARNING ALARM OPERATION .............1 ........11 1. Safety information ..........25 4.7 Measurement Preparation......38 1.1 Preliminary .............25 4.8 Current Measurement ........38 MAINTENANCE ..........1 MEMORY FUNCTION ........12 1.2 Usage .............26 4.9 Voltage Measurement ........39 1.3 Mark ...............27...
  • Page 3 Leakage Clamp Meter Leakage Clamp Meter 1.1.4 Probe should be in good condition. Before use, 1. Safety Information please check whether the probe insulation is damaged and if the metal wire is bare. WARNING The special attention should be paid whenusing the 1.1.5 Use the probe table provided with the meter to meter because the improper usage may cause electric ensure safety.
  • Page 4 Leakage Clamp Meter Leakage Clamp Meter dusty environments. cover, remove probe from the circuit to be 1.2.12 If you find any abnormal phenomena or failure measured. on the meter, stop using the meter. 1.4.3 To avoid wrong readings causing electric shock, when "...
  • Page 5 Leakage Clamp Meter Leakage Clamp Meter 2.1 Part Name (1) The central of the clamp head (2) Transfer switch (3) Resistance, capacitance, voltage, diode and continuity input jack (4) Common end jack (5) LCD display (6) Function choice button (7) Trigger (8) Current clamp head: used for leakage current measurement.
  • Page 6 Leakage Clamp Meter Leakage Clamp Meter 2.3 LCD Display 3. Specifications The meter should be recalibrated under the condition of 18°C~28°C, relative humidity less than 75% with the period of one year. 3.1 General Automatic measuring range and manual measuring range.
  • Page 7 Leakage Clamp Meter Leakage Clamp Meter 3.2 Technical Indicators When clamping 2 or more cables to measure leakage current, the result may be interfered by the current on the cable. The deviation may be more than 1mA when the current on the cable is 1 Amp.
  • Page 8 Leakage Clamp Meter Leakage Clamp Meter...
  • Page 9 Leakage Clamp Meter Leakage Clamp Meter 1) Turn the transfer switch to turn on the power. When battery voltage is low (about2.4V), LCD displays " " symbol, replace the battery. 2) 2) " " symbol means that input voltage or current should not be more than the specified value, which is to protect the internal line from damage.
  • Page 10 Leakage Clamp Meter Leakage Clamp Meter 2) To get accurate reading, connect the lead to be tested at the center of current clamp. 3) " " indicates that maximum input AC current is 150A. 4) 4) Do not touch or hand hold position over protective barri , when measure current.
  • Page 11 Leakage Clamp Meter Leakage Clamp Meter...
  • Page 12 Leakage Clamp Meter MGL EUMAN, S.L. Parque Empresarial de Argame, C/Picu Castiellu, Parcelas i-1 a i-4 E-33163 Argame, Morcín Asturias, España, (Spain) R-00-05-2206...