Oisetup32 Software Basic - Toshiba OIS Series User Manual

5.3

OISetup32 Software Basic

The OIS60 unit has to be configured before its use in any system. Complete configuration consists of
defining:
- OIS Settings
- OIS Network Configuration
- Tag Database
- Screens and Screens Task-List, Touch-keys, if required.
- Global Keys
- Alarms
- Global and Power-on Task list
The complete configuration is stored as an Application. This application is downloaded in OIS60.
5.3.1. OIS Settings:
OIS Settings define following properties of OIS60:
a. Hardware Settings
- Application Memory
The Application Memory of OIS can be changed using this option. Use this if only you have purchased a
nonstandard unit with a different memory option.
b. Screen Saver Enable
OIS60 also has a screen saver option for the unit. When no touch key action is performed for the time
specified by screen saver time, display is turned off. Display is turned on when user touches the
touch-key.
c. Keypad Options
- Keypad Queue Size
If a task for a key is in progress and another key is pressed, then the second key (latest pressed) is stored
in a Key Queue. User can change the queue size using this option.
- Queue full options
User has a choice to select what should be done if the queue is full and another key is pressed. Either the
first or the last key pressed can be ignored.
d. Float Format
This option defines how float data will be stored in the unit. Generally it is not required to be changed. It
should be changed only when float format storage is different in a PLC.
e. Printer Port Options
OIS60 has a Serial Printout Facility. User should connect Serial Printer cable to the Serial Port of the
OIS60. Communication parameters for serial printing can be changed using this option.
- Baud Rate
Baud Rates available are 300, 600, 1200, 2400, 9600, 19200.
- Number Of Bits
Data bits can either be 7 or 8.
- Parity
Parity options are Odd, Even, None.
- Number of Columns
This is decided by the paper size of the serial printer. User can select the column size between 1 to 80
characters. After the specified number of characters OIS sends a Terminating character.
- Terminating Character
Options for terminating character are None, CR, LF and CR+LF.
- Maximum Characters of Screen
This option defines the maximum number of characters to be printed per screen. This option is applicable
for the complete application.
Page 25
Configuration Software