Toshiba OIS Series User Manual page 41

Configuration Software
Register Data Entry Object:
To edit a register in the PLC, select Register Data Entry in the Data entry dialog box. Register Data
Entry dialog box allows user to select the tag, Data type, data format, low limit, high limit, Math -1st and
2 nd operation. In tag selection window, there is the list of Tags available where data can be written. You
can select the one you want from the list. The list will NOT display any read only registers which can not
be modified. Data entered can be limited by assigning a Low and a High limit for the data entry. Data can
be entered in various types namely., Unsigned Integer, Signed Integer, Hexadecimal, BCD, Binary (1
word) and Float. Data format should be selected by the user. Default format is Unsigned integer. Low and
High limits restrict the data that can be entered in the register. Two mathematical operations can be
performed on the data be entered. Please ensure to place a Numeric Keypad object on the screen.
Display OIS / PLC Data:
This object can be used to view PLC / OIS. To place embedding object click on 'Display OIS / PLC Data'
Tool . In the dialog box user can select either Bit Text, Register value or Register Text.
Bit Text displays text depending on the status of a coil or bit. Register Value displays the value of the
register. User can scale the register value by performing math operations on the tag value. Register Text
displays text depending on the value of a register. Text is defined for various ranges of a register tag.
To add Bit Text object, select Bit Text in the Display OIS or PLC Data dialog box. In the window, user
can enter text to be displayed depending on the state of a Coil.
Page 37