Toshiba OIS Series User Manual page 30

Configuration Software
5.3.2. OIS Network Configuration:
This setting selects the PLC Model, PLC type, Node number in a system. User can also connect multiple
PLCs of the same type/protocol to a single OIS. Each PLC must have unique identification number which
is termed as NODE ID.
5.3.3. OIS Tags:
Each register in the PLC memory has a unique address and can be identified by giving a specific name to
it. This information is stored as Tag Data Base in OISetup32. Any coil or register to be used in the appli-
cation must be first defined in the Tag data base.
5.3.4. Screens:
Operator views the PLC data on the screen of the OIS60 unit. Tasks can be defined for a screen. Also,
the action for touch-keys when a screen is acting can be defined.
5.3.5. OIS Alarms:
Alarms can be defined in the Alarms Window. Alarms are defined on a single bit of any one word tag. All
the tags must be defined before defining the Alarms. Alarms can be set on each bit in any Tag.
5.3.6. OIS Application Task-List:
Application Task List is of two types: Power-on Task-List and Global Task-List. Power-On Task-List is
performed only once after the unit is powered on. Global Task-List is performed till the unit and PLC are
communicating.
5.3.7. OISetup32 Menu Structure
Run OISetup32.exe. Following splash screen will be displayed.
Main window will be displayed after the splash screen. Main window consists of two main parts: Menu
Bar and the Tool Station.
Page 26