Product Introduction; Skxpro/Skx5 Diagram - KoamTac SKXPro Quick Manual

Product Introduction

The SKXPro/SKX5 is a 2D Imager Barcode Data Scanning Sled for the Samsung Galaxy XCover Pro/5. It is
connected to the XCover Pro/5 via the USB Type-C port at the bottom of the SKXPro/SKX5. Data between the
SKXPro/SKX5 and XCover Pro/5 is transferred through this physical connection, not by Bluetooth.

1.1 SKXPro/SKX5 Diagram

① Left & Right SCAN Keys (for SKXPro/SKX5)
② VOLUME UP Key (access to XCover Pro/5 Volume Key)
③ VOLUME DOWN Key (access to XCover Pro/5 Volume Key)
④ SIDE Key (of XCover Pro/5)
⑤ XCover Key (access to XCover Pro/5 XCover Key)
⑥ Top Key (access to XCover Pro Top Key)
⑦ Hand Strap Holes (for SKXPro/SKX5)
⑧ USB Port to access XCover Pro/5 or SKXPro/SKX5 from PC
⑨ Barcode Scan Window (for SKXPro/SKX5)
⑩ Pogo Pins for Charging XCover Pro/5 and SKXPro/SKX5
⑪ Screw Holes (for SKXPro/SKX5)
See Reference Manual for more detailed information
Visit store.koamtac.com to purchase additional SKXPro/SKX5 and accessories.
SKXPro/SKX5
Quick Guide
QG_SKXPro_SKX5_20210809 p2