Page 3
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from KOAMTAC, Inc. The material in this manual is subject to change without notice. KOAMTAC reserves the right to make changes to any product to improve reliability, function, or design.
Page 4
SLED-mPOS User Manual NTRODUCTION Product Disposal This device should not be placed in municipal waste. Please check local regulations for disposal of electronic products. Revision 1.0 Copyright®2012-2021, KOAMTAC, Inc.
Companion allows businesses to take payments with existing swipe cards, as well as support those implementing the newly adopted EMV systems without changing of solutions. To find out more about KOAMTAC, Inc. and our family of products, visit us at www.KOAMTAC.com. Revision 1.0...
SLED-mPOS User Manual NTRODUCTION 1.2 Package The standard SLED-mPOS package contains: 1. One SLED-mPOS 2. USB Cable l 5pin Micro USB cable Revision 1.0 Copyright®2012-2021, KOAMTAC, Inc.
NTRODUCTION 1.3 Characteristics Before starting to use the SLED-mPOS, the user should become familiar with its physical characteristics. Refer to the follow figure that indicate the placement of Secure Touch Pinpad, OLED display, LED, NFC Reader, Magnetic-Stripe Card Reader, IC Card Reader and ports on the KDC.
Page 9
SLED-mPOS User Manual NTRODUCTION OLED Display NFC Reader IC Card Reader Secure Touch Pinpad Magnetic-Stripe Card Reader Figure 1 – SLED-mPOS Overview Revision 1.0 Copyright®2012-2021, KOAMTAC, Inc.
SLED-mPOS User Manual NTRODUCTION 1.4 Secure Touch Pinpad While in the SLED-mPOS menu, press this button to scroll down the selection bar. While on the main screen, press this button for 5 seconds then the SLED-mPOS will enter (Menu/Down button) the SLED-mPOS menu mode.
KDC User Manual PPLICATION ENERATION 2. Operating your SLED-mPOS 2.1 Basics Read NFC Tag (MIFARE) 1. The host application sends a command to enable the NFC Reader. 2. Touch NFC tag to the NFC antenna symbol on the front case, and make sure the tag and case are within 4cm of each other.
KOAMTAC will repair or, at its opinion, replace products that prove to be defective in material or workmanship under proper use during the warranty period. KOAMTAC will not be...
Page 13
ARRANTY Warranty Coverage and Procedure During the warranty period, KOAMTAC will repair or replace defective products returned to KOAMTAC warehouse. International customers should contact the local KOAMTAC office or support center. If warranty service is required, KOAMTAC will issue a Return Material Authorization Number.
KDC User Manual 5. Contact Information CORPORATE HEADQUARTERS 116 Village Blvd., Suite 305 Princeton, NJ 08540, USA Phone: 609-256-4700, FAX: 609-228-4373 Email: support@koamtac.com For more information, visit our website - www.KOAMTAC.com Revision 1.0 Copyright®2012-2021, KOAMTAC, Inc.