Summary of Contents for ICP DAS USA WISE-224 Series
Page 1
Quick Start WISE-2241M/WISE-2246M v1.0, April 2019 Technical Support WISE-2241M / WISE-2246M User Manual: http://wise.icpdas.com/Download.html ftp://ftp.icpdas.com/pub/cd/wise_cd/ WISE-2241M / WISE-2246M Website: http://wise.icpdas.com What’s In the Box? In addition to this document, the package includes the following items: WISE-2241M microSD card and micro SD/SD adapter WISE-2246M Screw Driver Pin Terminal * 16...
Page 2
Configuring the boot mode Before starting WISE-2241M / WISE-2246M at the first time, be sure that the switch is placed in the “0” position. Connect to PC, Network and Power The WISE-2241M / WISE-2246M is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC.
Page 3
Using Browser to Assign a New IP The WISE-2241M / WISE-2246M is an Ethernet controller, which comes with a default IP setting; therefore, you must first assign a new IP setting to the LAN1 port of WISE-2241M / WISE-2246M. The factory default IP settings of WISE-2241M / WISE-2246M are as follows: Item Default...
Page 4
Step6: After complete the IP setting, please save it, and then the new IP setting will take effect. Go to WISE-2241M / WISE-2246M Web Site to edit Control Logic Please follow the steps below to implement IF-THEN-ELSE control logic on ICP DAS WISE-2241M / WISE-2246M controllers: Step1: Open a browser, and type in the URL address of the WISE-2241M / WISE-2246M.