Bennett Read MULTI-FORCE User Manual page 9

MAINTENANCE OF WASHABLE FILTERS
1. Remove the dirt container by pressing
the dirt container release button (9) and
lifting up on the handle
TIP:
For maximum cleaning performance, check the
filters often and clean or replace if necessary.
2. Open the lid of the dirt container by
lifting the dirt container filter catch
CAUTION:
!
Never operate your MULTI-FORCE vacuum
without all the filters in place. Doing so may
damage the motor and void the guarantee.
3. Lift the Dirt Container Filter (21) out from
above the Multi-Cyclonic Dirt Separator
(13). Once the filter has been removed,
gently wash it in luke-warm water. A mild
detergent may be used. Ensure that the
filter is well rinsed and COMPLETELY DRY
before placing it back into the machine
WARNING:
!
Do not use any appliances such as electric
hair dryers, to dry the filters. Filters may only
be AIR DRIED.
1.
2.
3.
WARNING:
!
Never operate your MULTI-FORCE
vacuum with damp or wet filters.
7