Baffle Replacement; Brick Replacement - Hearth and Home Technologies Quadra-Fire SANTAFEI-C Owner's Manual

Table of Contents

Advertisement

B. Baffle
PART NUMBER: 7001-034
1. Follow Proper Shutdown Procedures on
2. The top baffle has a hook on the bottom left side that
rests on the top lip of the cast brick. There is a tab on
the bottom right side that hooks into the side bracket.
Remove the top baffle by first pulling the baffle forward
until back edge drops down. Then slide baffle back until
the front edge clears the shelf that it had been resting
on (Figure 26.1, Figure 26.2 and Figure 26.3).
3. Reinstall new baffle.
Figure 26.1
Figure 26.2
Figure 26.3
C. Bricks
PART NUMBERS:
LEFT OR RIGHT BRICK: SRV414-0270
CENTER: SRV414-0260
The baffle must be removed before any brick removal.
Removal of left or right side brick:
1. Remove the right brick by holding top lip of the brick
and lifting up.
2. Repeat for left brick.
3. Reinstall bricks in reverse order ensuring that
the bricks are flush against the back wall of the
firebox (Figure 26.4 and Figure 26.5).
26
page
18.
Insert Baffle Tab into Slot
Opening at left side of Baffle
Figure 26.4
Figure 26.5
Removal of center brick:
1. Follow Steps 1 & 2 from Removal of left or right side
brick to remove left and right brick.
2. Use an 5/32 Allen wrench to remove bolt out of center
brick and set aside; remove and discard brick.
3. Validate rope in still in place; rope is wrapped around
drop tube and ends are secure with rope tape.
4. Add new center brick and taking care not to cross
thread the bolt; reinstall brick (Figure 26.6).
5. Repeat Step 4 from Removal of left or right
side brick.
6. Reinstall baffle (See Baffle on
Figure 26.6
Lip
Lip
Tab
Tab
Figure 26.7
7019-802H
Brick is flush against back wall
Brick in
front of
clip and
Notches
exposed
Right Brick
Installed
page
26).
Rope
Rope
Bolt
Bolt
Tab
Tab
04/21

Advertisement

Table of Contents
loading

Table of Contents