Intended Use; Before First Use; Assembly/Preparation - Westfalia 801539 Instruction Manual

Intended Use

The electric snow thrower is designed for removing snow from well paved
paths or smaller areas in domestic purposes.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose. The operator is
liable for any damage caused by improper use.

Before first Use

Remove the electric snow thrower and all additional parts out of the
packaging.
Check all parts for damage in transit and do not use a damaged tool.
Keep packaging materials out of reach of children. There is risk of suffocation!

Assembly/Preparation

1. Mount the push bar (9) with the bottom frame (7). Fasten both parts with the
wing nuts (2) and tighten the wing nuts by hand.
2. Fasten the power cable
with the included cable
clamps.
Using
11
Clamps