Westfalia 801539 Instruction Manual page 17

3. Hook the discharge chute (6) on the
front side of the motor housing and
tighten the discharge chute with the
cross slot screw on the motor housing.
4. Insert the upper part of the hand crank
(3) into the extension bar (4) and
tighten both parts together. Make sure
the connector (10) for the hand crank
is positioned upwards. Tighten the
screw of the connector, too.
5. Check proper function of the hand crank for the discharge chute by turning the
hand crank (3). By turning the hand crank clockwise the discharge chute will
turn to the right. By turning the hand crank counter clockwise the discharge
chute will turn to the left.
6. With the discharge chute you can adjust the throwing angle. First unscrew the
wing nuts (2) on the discharge chute and adjust the chute deflector. Re-tighten
the wing nuts.
Using
12
Screw