Intended Use; Before First Use; Assembling / Preparations - Westfalia 80 31 42 Instruction Manual

Intended Use

The electric snow thrower is designed for removing snow from well maintained
paths or smaller areas in domestic purposes.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose. The operator is
liable for any damage caused by improper use.

Before first Use

Remove the electric snow thrower out of the packaging.
Check all parts for damage in transit and do not use a damaged tool.
Keep packaging materials out of reach of children. There is risk of suffocation!

Assembling / Preparations

A
1. Insert the upper tube (3) into the lower tube (6) (see fig. A).
2. Carefully insert the connection screw (5) into the provided hole and screw the
locking knob (10) on the screw (see fig. B). Tighten the locking knob. Pay
attention not to damage the cable that is running inside the tube. If necessary,
use a blunt object to move the cable to one side.
Using
B
11