ADTRAN NetVanta 3200 Application Manual page 3

Configuration steps using the web interface for NetVanta
3200/3205 "Host Router":
1. Choose "Physical Interfaces" from the left hand side menu options.
2. Choose "eth 0/1" from the list of physical interfaces displayed.
3. Under the "IP Settings" section type in the new "IP Address" and "Subnet Mask"
you would like to use. In the application drawings example the IP address
192.168.1.254 is used.
Application Drawings: Routing across the WAN
Revision C
3 of 27
Page