ADTRAN NetVanta 3200 Application Manual page 17
Application drawings routing across the wan
Hide thumbs
Also See for NetVanta 3200:
- Hardware installation manual (90 pages) ,
- Specifications (2 pages) ,
- Quick start manual (2 pages)
Advertisement
4. Press the "Apply" button.
Note: If you choose to change the IP address of Ethernet 0/1, you will need to change the
IP address of your workstation to an IP on the same network as Ethernet 0/1 to continue
configuring the router.
5. Choose "Physical Interfaces" from the left hand side menu options.
6. Choose "t1 1/1" from the list of physical interfaces displayed.
Application Drawings: Routing across the WAN
Revision C
17 of 27
Page
Advertisement
Need help?
Do you have a question about the NetVanta 3200 and is the answer not in the manual?
Questions and answers