Dmx Linking - Chauvet DJ Intimidator Beam Q60 Quick Reference Manual

EN
Menu Map
Refer to the Intimidator Beam Q60 product page on
Main Level
Address
DMX
Slave
Run Mode
Manual
Pan Reverse
Tilt Reverse
Screen
Reverse
Pan Angle
Tilt Angle
Setup
Totem Mode
Sensitivity
USB Set
DMX Loss
Running Mode:
Sys Info
DMX Address:
Temperature:

DMX Linking

The Intimidator Beam Q60 can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 497.
Master/Slave Connection
The Intimidator Beam Q60 uses the DMX data connection for its Master/Slave mode. Information about configuring the
Intimidator Beam Q60 for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
3
QUICK REFERENCE GUIDE
Programming Levels
001–512
16CH
12CH
Slave1–4
Auto
Sound
Pan
000–255
Tilt
OFF
ON
OFF
ON
OFF
ON
540
360
180
260
180
90
OFF
UP
DOWN
001–100
OFF
ON
Hold
Black
Auto
Sound
Reset
Factory Set
Ver: V_
_ _ _ _ _ _ _ Displays the current running mode
_ _ _
_ _ _
www.chauvetdj.com for the latest menu map.
Description
Sets the DMX starting address
Selects the DMX mode
Selects Slave mode 1, 2, 3, or 4
Selects Auto mode
Selects Sound-Active mode
Manual pan control
Manual tilt control
Normal pan operation
Reverse pan operation
Normal tilt operation
Reverse tilt operation
Normal display
Reverse display
Selects the 540° pan angle range
Selects the 360° pan angle range
Selects the 180° pan angle range
Selects the 260° tilt angle range
Selects the 180° tilt angle range
Selects the 90° tilt angle range
Normal mode
Totem mode Base Up
Totem mode Base Down
Sets the sound sensitivity
Enables or disables USB function
Holds the last setting when signal is lost
Blacks out the product
Sets the unit to Auto mode when signal is lost
Sets the unit to Sound mode when signal is lost
Resets the product
Loads factory defaults
Displays the firmware version
Displays the current DMX address
Displays the product temperature in °C
Intimidator Beam Q60 QRG Rev. 6