Download Print this page

After Use Safety And Maintenance; Flame Check - Smoke hollow 30167G Assembly & Operation

Hide thumbs Also See for 30167G:

Advertisement

DANGER
DANGER
·
Use caution when lifting and moving the smoker to
avoid strains or back injury. 2 people are recommended
to lift or move the smoker.
·
DO NOT store the smoker near gasoline or other
combustible liquids or where combustible vapors may
be present. Keep the area around the smoker clear and
free of combustible materials and vapors.
·
DO NOT store this smoker in an area accessible to
children or pets. Store the smoker in a dry, protected
location.
·
DO NOT allow anyone to conduct activities around
the smoker following use until it has cooled. It is hot
during operation and remains hot for a period of time
following use.
·
This smoker becomes extremely hot - allow the
smoker to cool completely before handling. If you must
handle the smoker while it is hot, ALWAYS wear
protective oven mitts or heat resistant gloves when
handling the smoker or its components. Allow the
smoker to cool before removing and cleaning the grease
pan.
GOOD FLAME
YELLOW
BLUE
Burner
Holes in Burner

FLAME CHECK

After Use Safety and Maintenance

Care and Maintenance to be performed before
each use:
CAUTION
performed only while the smoker is turned off and cooled.
Clean the water bowl and cooking grids with hot, soapy
water. Rinse and dry thoroughly. You may prefer to coat
the water bowl and cooking grids lightly with cooking oil
or cooking spray.
Frequently check and clean the venturi and burner for
insects and insect nests. A clogged tube can lead to fire
outside the smoker. Also make sure the smoker does not
have any foreign objects obstructing the flow of
combustion and ventilation air.
To clean the inside and outside of the smoker cabinet,
simply use a damp cloth. Spray-washing with a water hose
is not recommended. All moisture should be wiped away
and not allowed to stand inside or on top of the smoker.
Once cleaned, you may prefer to lightly coat the interior of
the smoker cabinet with cooking oil or cooking spray.
If rust is present on the exterior surface of the smoker,
clean the area with steel wool or emery cloth and use
heavy duty, heat resistant paint.
NEVER apply additional paint to the interior of the
smoker. If rust is present on the interior of the smoker,
clean it thoroughly with steel wool or emery cloth and
lightly coat the area with cooking oil or cooking spray to
help minimize recurring rust.
When an LP tank is not connected, and to help prevent dirt
or other foreign particles from clogging the regulator, hang
BAD FLAME
the end of the regulator hose from the side handle using
the supplied S-hook.
During each use, inspect the flames at the burner. A good
flame should be blue with a yellow tip about 1 inch in
length. If flames are excessively yellow and irregular, oil
residue and food deposits may be collecting on the burner.
Try cleaning the burner surface and the holes to improve
the flames. Bad flames may also be caused by poor
regulator-to-venturi attachment. Always let the smoker
cool before cleaning or checking the assembly.
To protect your smoker from weather, always keep your
smoker covered while not in use.
Keep the area clear of all flammable liquids, combustible
material including but not limited to wood,dry plants
including grass, brush, paper, and canvas.
The smoker may be stored indoors only if the cylinder is
disconnected and removed.
: All care and maintenance procedures are to be
23

Advertisement

loading

This manual is also suitable for:

34167g34166gc38207g