Table of Contents
Advertisement
5.4.3 Settings for KTS GPA Visualizer
The following settings can be adjusted by tapping on "SETTINGS":
o "Number of columns": Varies number of columns.
o "Number of measurements": Number of measurements in one column.
o "Language": Selection between German, English and French. (Note: App
will restart after selecting a language).
o "Reset Settings": Resets the device to factory settings.
o "Developer Settings":
except for "Measure-delay". Here you can change the time between two
measurements. Please note that this option will effect the speed options
"SLOW", "NORMAL" and "FAST" under "MEASURE"
5.5 Reinstallation
If you want to reinstall KTS GPA 3D or Visualizer or you want to use a different
Android device, the apk.-files are available on an enclosed flash drive. Just copy the
files from the flash drive to your device and execute them. In order to do that you need
to allow installation of apps from unknown sources. Go to the settings (gear icon in
menu). Scroll down to the "Security" option and tap to open it. "Toggle" the switch of
"Unknown sources". There is no additional software required. The device is ready for
use.
6 System requirements and license agreements
6.1 System requirements
Both KTS GPA 3D and KTS GPA Visualizer run on devices with at least Android 5.0.
Note: Different display dimension can result in a distorted display.
KTS-Electronic GmbH & Co. KG – GPA 3000 DR
Please do not change the developer settings
Abb 5.14 Settings
21
Advertisement
Table of Contents
