Bluetooth-Connection - KTS-Electronic GPA 3000 DR User Manual

5.2 Bluetooth-Connection

To evaluate the measurements of the GPA universal probe on the tablet you need to
connect the electronic unit to the tablet via Bluetooth.
 To pair the electronic unit with the tablet computer you need to switch on the
unit and select the universal probe of the "GPA"- search method.
 Turn on the tablet and run the program of your choice.
 Select "CONNECT" from the menu on the right hand side of the screen.
 Select the shown device.
Note: If there is no device shown tap on the button "SCAN FOR BLUETOOTH
DEVICES" (several times if necessary) and select it.
 A confirmation pop up with:"CONNECTED" will appear on the tablet computer.
 A blue dot will appear on the screen of the electronic unit.
KTS-Electronic GmbH & Co. KG – GPA 3000 DR
Fig. 5.2 Assembly tablet with telescope rod and mount
Fig.5.3 Successful Bluetooth connection
14