Labview™ Programming; Labview™ Example Programs; Virtual Instruments - PEP CP380 Manual

CP380
The UOs can be changed at any time to suit user requirements and can be saved as a
user specific object.
4.3 LabVIEW™ Programming
LabVIEW™ components for the CP380 are delivered optionally on (a) separate disk(s).
The CP380 is supported by LabVIEW™ full version 4.x or higher under Windows95/98/
NT. For installation of LabVIEW™ driver components and for further information please
see the README file on the disks delivered with the CP380 LabVIEW™ driver. For
basics of LabVIEW™ programming please use your LabVIEW™ documentation and the
LabVIEW™ online help index.
4.3.1 LabVIEW™ Example Programs
For demonstration purposes and to assist understanding, demo programs using the
important Virtual Instruments (VIs) have been written. They can be accessed via the
menu item "File - Open".
4.3.2

Virtual Instruments

For convenient use of the driver, predefined „Virtual Instruments" (VIs) have been devel-
oped. They can be accessed via the additional menu item „File - Open" and be included
in the LabVIEW™ development environment. They can be placed and "wired" in your
application in the same way as standard LabVIEW™ VIs.
The source VIs are self descriptive and based on the API functions documented in the
chapter "Function Reference". A short description of every VI is also available in the VI
ME-9x Function Tree. This VI is for documentation purposes only and can be
opened by the menu "File - Open". Under "Description" you will find a brief description of
every Virtual Instrument.
$ $
Note!
The VIs can be changed at any time to suit user requirements and
can be saved as a user specific VI.
ID 19313, Rev. 0100 ® PEP Modular Computers GmbH
Programming
Page 4 - 5