Hardware Installation; Driver Installation; Windows Nt 4.0 - PEP CP380 Manual

CP380
2. Installation
If several boards are to be installed, please proceed board by board. After installing
each board and registering the board with the operating system (Running SETUP.EXE),
run a complete system check before installing the next board. The test program
ME9x.EXE can be used for this purpose. Once the test has been successfully com-
pleted, proceed with the installation of the next board in an identical manner.

2.1 Hardware Installation

The CP380 family are Plug & Play compatible under Windows NT and will be configured
by software. There are no settings required before installing the board into the com-
puter. Make sure the computer is turned off before installing the board.

2.2 Driver Installation

2.2.1

Windows NT 4.0

• Please insert the disk "Windows NT Driver Disk for CP380".
• From the start menu of Windows, choose Run.... Under the option Open:, enter
the path for the SETUP.EXE
Browse.... Confirm the selection and follow the instructions of the setup program:
• The installation program will start.
• In the window "Install Options", choose "Install a new board" and confirm the
selection with OK.
• Follow the installation program instructions and make sure you have your serial
number ready.
• The following files will be installed:
• The kernel driver ME9x_32.SYS into the path <Windows directory>\
SYSTEM32\DRIVERS
• The API-DLL ME9x_32.DLL into the path <Windows directory>\SYSTEM32
• Dialogue DLL MEDLG32.DLL into the path <Windows directory>\SYSTEM32
• Files for programming in Visual C++ into the path <PEP working direc-
tory>\ME-9x
• Files for programming in Delphi into the path <PEP working directory>\ME-9x
• Files for programming in Visual Basic into the path <PEP working direc-
tory>\ME-9x
• Example programs for high level language programming into the path <PEP
working directory>\ME-9x\DEMOS
• Test program
9x\TEST
• Registry entries will be made
• Reboot your computer. The system driver will automatically be loaded
ID 19313, Rev. 0100
file on the installation disk provided or click
ME9x.EXE into the path <PEP working directory>\ME-
® PEP Modular Computers GmbH
Installation
Page 2 - 3