CP380
Multiprocessor
In a CompactPCI multi-processer system, a system controller (CP610) communicates
with other CPU's through a non-transparent PCI / PCI bridge
Housings
•
Board cages for 19-inch cabinets or wall mounting
•
PCI tower
•
PCI desktop housing
Mass Storage Devices
•
Hard-disk drive
•
Floppy-disk drive
•
CD-ROM drive
Power Supply Units
•
19-inch "M", 180 W, 120/230 V AC, 3.3V/14A, 5.1V/20A, 12V/2A, -12V/1A
•
"ATX", 235 W, 120/230 VAC, 3.3V/14A, 5V/22A, 12V/8A,-12V/1A, -5V/0.5A,
5VSB/0.1A
Form Factors
PEP Modular Computers CompactPCI boards are available in different form factors,
mainly as 3U (single-height) and 6U (double-height) boards and as 4HP (single-width)
and 8HP (double-width) boards.
Please note that the following units of measurement are used to express the dimensions
of PEP CompactPCI card slots:
•
Height: 1 U = 44.45 mm
•
Width: 1 HP = 5.08 mm
On certain boards/carriers with PMC connectors, PMC add-on modules can also be
installed. Please note that the form factor of PEP Modular Computers PMC modules is:
•
149mm x 74mm (single-size standard).
For a detailed description of the PEP Modular Computers CompactPCI modules please
consult the specific component's manuals or data sheets.
PEP Advantage
As the PEP Modular Computers CompactPCI system provides
comprehensive open solutions. New features and functionalities
may be added to our range. To keep abreast of the latest develop-
ments, please contact your local PEP Sales Office or visit the
Web Site.
ID 19313, Rev. 0100
® PEP Modular Computers GmbH
Introduction
PEP
Page 1 - 5