Eastwood QST-80 Instructions Manual page 11

• Press
▼
Displays: LUBE TIME (FIG 22)
(Cumulative time of Scroll Oil use)
• Press
▼
Displays: ALARM1 (FIG 23)
(Records occurrence of PHASE REVERSE)
• Press
▼
Displays: ALARM2 (FIG 24)
(Records occurrence of HIGH LOAD PRESSURE)
• Press
▼
Displays: ALARM3 (FIG 25)
(Records occurrence of UNLOADED HIGH PRESSURE)
• Press
▼
Displays: ALARM4 (FIG 26)
(Records occurrence of HIGH FAN TEMPERATURE)
• Press
▼
Displays: ALARM5 (FIG 27)
(Records occurrence of HIGH MOTOR TEMPERATURE)
• Press
▼
Displays: PROD DATE (FIG 28)
(Build date of unit)
• Press ▼
Displays: SERIAL# (FIG 29)
(Serial # of unit)
• Press
▼
Displays: C-STATE RX:-TX: (FIG 30)
(This is a manufacturer-only check point setting used for calibration purposes)
Pressing
▼
MOD PARAMETERS). Pressing
gain access. These menus are exclusively used at assembly to achieve initial factory settings and calibrations only. No password is
available and no user manipulation of these settings is possible.
To order parts and supplies: 800.343.9353 >> eastwood.com
beyond the RUN PARAMETERS display will reveal three additional Menus (USE PARAMETERS, FAC PARAMETERS and
will produce a prompt in the Display Window that requests a Password be entered in order to
FIG. 22
FIG. 23
FIG. 24
FIG. 25
FIG. 26
FIG. 27
FIG. 28
FIG. 29
FIG. 30
11