Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METER APOGEE SU-221
Summary of Contents for METER APOGEE SU-221
- Page 1 APOGEE UV SENSOR...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. Introduction ....................2 2. Installation ....................2 2.1 Set Up Mounting Assembly ................ 4 2.2 Connect to METER ZENTRA Series Logger ..........5 3. Data Interpretation ................6 4. Troubleshooting ..................6 5. Customer Support ................7 Index ........................ -
Page 4: Introduction
Apogee UV sensors that have been preconfigured by METER Group to work seamlessly with METER ZENTRA series data loggers. Details of how the ZENTRA system handles the data are also included. Please read this document carefully in its entirety before going out to the field. - Page 5 INSTALLATION Table 1 Installation (continued) Conduct System Check METER strongly recommends setting up and testing the system (sensors and data loggers) in the lab or office. Inspect and verify all components are intact. Visit the data logger product page for the most up-to-date software and firmware.
-
Page 6: Set Up Mounting Assembly
Apogee UV sensors must be level to accurately measure UV irradiance incident on a horizontal surface. Each Apogee UV sensor purchased from METER comes with an AL-120 Solar Mounting Bracket with Leveling Plate. The AL-120 can be mounted to either a horizontal or vertical post, depending on which set of holes is used. -
Page 7: Connect To Meter Zentra Series Logger
Use ZENTRA Utility to set the measurement interval. Use ZENTRA Utility to configure communication settings for data transfer to ZENTRA Cloud. Sensor data can be downloaded from METER data loggers using either ZENTRA Utility or ZENTRA Cloud. Refer to the logger user manual for more information. -
Page 8: Data Interpretation
Customer Support for a replacement connector or splice kit. If a cable is damaged refer to the METER wire-splicing guide cable repair. It is recommended that Apogee UV sensors are returned for factory recalibration every 2 years. Visit Apogee repairs (apogeeinstruments.com/recalibration-and-repairs) or contact... -
Page 9: Customer Support
Phone: +49 89 12 66 52 0 Fax: +49 89 12 66 52 20 Website: metergroup.de If contacting METER by email, please include the following information: Name Email address Address Instrument serial number Phone Description of the problem NOTE: For products purchased through a distributor, please contact the distributor directly for assistance. -
Page 10: Index
INDEX INDEX cables 3, 4, 5 ZENTRA series data logger 2, 3 components 2 ZENTRA software connecting 5 Cloud 2, 6 customer support 7 Utility 2, 6 ZSC 2 data 6 installation mounting 3, 4 preparation 3 tools needed 2 mounting 3 mounting bracket 2, 4 recalibration 6... - Page 11 18444-00 8.31.2021 METER Group, Inc. USA 2365 NE Hopkins Court Pullman, WA 99163 T: +1.509.332.2756 F: +1.509.332.5158 E: info@metergroup.com W: metergroup.com METER Group AG Mettlacher Straße 8, 81379 München T: +49 89 1266520 F: +49 89 12665220 E: info.europe@metergroup.com W: metergroup.de...
Need help?
Do you have a question about the APOGEE SU-221 and is the answer not in the manual?
Questions and answers