Enabling Admission Control - Nokia M1112 User Manual

Figure 11. Wireless LAN page
6.2

Enabling admission control

On the WLAN Clients page you can enable access control based on the MAC
addresses of the wireless LAN clients (that is the PC's or laptops in your wireless
network).
When access control is enabled, only the wireless stations on the client table have
access to your wireless network.
To add a client in the client table, do the following:
1.
2.
3.
4.
24 (40) © Nokia Networks Oy
Nokia Proprietary and Confidential
All manuals and user guides at all-guides.com
Nokia M/MW Gateways M1112, M1122, MW1112, MW1122, MW1324, MW1352
Choose a name for the wireless client and write it in the Name field. (The
fields used for adding new clients are located next to the Add new button).
Write the client's MAC address in the MAC address field. Depending on
your Windows version, refer to the instrustions below on how to find out
the MAC address(es) of the computer(s) in your wireless network.
Select the encryption key length from the WEP key length menu. If you
select the key length (that is, your choice is other than "None"), you must
also enter the encryption key.
Select the Client table MAC address option from the Admission method
pull-down menu.
DN01154358
Issue 1-0 en