Resetting The Filter Counter; Batteries - VENTILAIRSEC VMI PULSE'R Prestige Galbé Installation Manual

WARNING: when changing the filter, only the drawer must be removed. You may get an electric shock,
get burnt or cut yourself if you open the housing.
6.2

Resetting the filter counter

This screen appears in the user mode:
Use the
200 d/200
Use the
YES/NO buttons (on NO by default) appear.
Use the
Use the button to confirm and if YES is active, then the filter counter reset request will be taken
into account. The number of days displayed automatically changes to 0.
6.3

Batteries

Changing the remote control's batteries
▪
You need 2 new LR6/AA batteries.
▪
With your thumbs, slide the cover down to open it.
▪
Remove the dead batteries.
▪
Insert the new batteries.
▪
Close the cover by sliding it up.
The batteries must not be thrown away with household rubbish. To dispose of
them in compliance with local standards, take them to your local collection point
or return them to your retailer or manufacturer.
Important: If the operation lasts more than 2 minutes, the time must be
reset on the remote control. When you start up again, the following
screen appears:
If the time has not been reset, it will display the last time saved.
buttons to select the "Reset" pictogram:
button to confirm, after which the "new filter?" message and the
buttons to choose YES or NO:
62