Installation; Preparation - VENTILAIRSEC VMI PULSE'R Prestige Galbé Installation Manual

3 Installation

The appliance must be installed by qualified staff.
The VMI® unit must be installed in compliance with the regulations in force: DTU 68.3.
Electrical connections must be made in accordance with the regulations in force: NFC 15-100.
For safety aspects, please refer to part 1.2 Safety rules.
When installing the VMI® Prestige unit, you must also have a Prestige radio remote control
Use the assembly instructions to install the URBAN VMI®
3.1

Preparation

Before installing the appliance, remove the three foam wedges
surrounding the motor inside the housing.
▪
Open the machine's cover by removing the 4 screws.
▪
Remove the foam wedges and the remote control.
▪
Close the cover again by screwing down the 4 screws.
Fix the two plastic collars supplied:
▪
One on the inlet and the other on the outlet. The same applies for the Cube version. Use the
D3.9 L9.5 screws supplied.
▪
Use the pre-drilled holes on the housing. Do not pierce the housing.
46