Accessing The Installer Mode/Configuration Mode - VENTILAIRSEC VMI PULSE'R Prestige Galbé Installation Manual

4.3

Accessing the installer mode/configuration mode

confirm and move on to the next number, press
The value of the code is only checked on the last number after pressing the
following screen appears:
To correctly set the VMI® unit, you must use the remote control's installer
mode. To do this, press the
screen:
1919
The installer code is
Press the buttons to change the value of the selected number. To
Choose your language by pressing the
to confirm.
Check that the date and time are correct.
Use the button to return to the main screen.
button until you get to the following
.
.
button. The
buttons then press
56