T-Fal NutriCook User Manual page 15

To clean the control panel and the valves
• Remove the control panel from the lid and remove the
®
Smart Timer : see the "Control panel" heading.
• Remove the Smart Timer
• Wash the panel under a gentle flow of running water.
• Visually check that the steam release outlet (A) is not
blocked by seeing light through it as shown in Fig.16.
If it is blocked, clean it under running water. Refit the
control panel.
• Check that the operating valve (L) located inside the
lid is mobile, by moving the program selector to
and pressing with a finger: Fig. 17. You can only
do this when the panel is fitted on the lid!
• You can clean this valve under running tap water.
• Also check that the safety valve (M) works properly by
using a cotton swab (for example) to press down hard
on the centre of the pipe, a part that should move: see
Fig. 18. You can clean this valve under running tap
water.
• You can also wash the control panel in the dishwasher,
after taking care to remove the Smart Timer
• Check that the steam release outlet seal (K) is in place.
If this seal is missing or has been damaged, leaks may
appear under the panel when your NutriCook is in use.
The shape of the seal lets you easily remove and refit
it. If necessary, you can get replacement seals from a
T-fal Approved Service Centre.
• Check that the pressure indicator (D) is clean. It can be
cleaned under running tap water.
Never place the Smart
®
Timer in the
dishwasher.
To store your NutriCook
• Turn the lid over and place it on the NutriCook body.
Safety
• Your NutriCook is provided with a number of safety
mechanisms.
Lid closure safety
• The jaws should be in contact with the lid edge. If this
is not the case, then steam will leak from around. The
pressure indicator and NutriCook will never come up to
pressure.
®
.
®
• Use a clean dry cloth.
• Never use solvents.
• Never place the Smart Timer
Never dismantle the
control panel.
Don't forget to remove
the Smart Timer
before cleaning the
control panel by hand
or in the dishwasher.
Never use a cutting or
pointed object to clean
the safetly valve (M).
.
To clean the timer
®
under water.
EN
FR
®
ES
16